Stone Tile Cleaning & Restoration Creekmouth

The initial surface on Limestone tiles will steadily dull. Scratching and etch marks pile-up and dull the initial polish. The only way to revive the initial finish is through polishing the Limestone. We operate specialized equipment and industrial diamond tooling to grind, hone and polish the Limestone.

In the event that tiles are not even, perfectly even this problem is named "lippage". We can grind off the jagged edges of the tiles, making a floor surface flat. You should have specialized machines and several years of experience to grind, hone and polish a Limestone floor, however the result is amazing. The Limestone floor will get the appearance of looking like a single slab of stone.

Following grinding, the tiles and the grout are at the exact same level. After grinding honing and polishing cleaning is a breeze, as the mop slides on the floor. Also, soil does not get stuck into the grout lines. If your Limestone has chips and cracks, we can repair them using resin fillers, closely colour matched with the Limestone. We will recommend the correct Limestone restoration process.

Find out moreabout our Limestone cleaning Creekmouth service plus our substantial stone floor cleaning restoration service or Book your free Quote

Slate is a wonderfully adaptable flooring that can be protected with many different finishes including rough texture, smooth honed or polished finish. Though slate has a minimal porosity, it will always to some extent absorb and oil based spills, making frustrating marks.

We use a mix of machine scrubbing and hand scrubbing to get rid of all traces of existing dirty sealers and clean the slate. When the professional cleaning is finished, use specialist sealers that last for years not just months.

If you have the right slate, it could be ground smooth, rendering it much easier to clean.

Read more about our Slate cleaning and sealing Creekmouth service along with our comprehensive stone cleaning  service or Book a Quote

Victoran clay geometric tiles are installed in Victorian and Edwardian Hallways.

Victorian tiles are made of natural clay and have a natural non-shiny finish.

Many of these floors have been sealed and then covered up with carpet or lino.

Old paint spills, waxes, polishes and sealer remains makes cleaning many of these floors a challenge.

After cleaning an impregnating sealer is applied to enhance the colours and protect the floor. A topical sealer or wax finish can give the tiles with a low-sheen finish.

Read moreabout our Victorian Minton Tiles cleaning and sealing Creekmouth service including our comprehensive professional cleaningtreatments or Book a Quote

Porcelain is a ceramic mix with sand and feldspar included to produce a denser tile.

The extra minerals helps make Porcelain more robust than traditional ceramic tiles.

If Porcelain is not produced properly, the top can absorb soil just like natural stone floors. This soil could be difficult to remove.

You need specialist machines and cleaning solutions to eliminate this soil.

We will help minimize the dirt with Porcelain sealers.

Solid colour Porcelain Tiles could be ground and polished, the same as Granite or Stone.

Get more information about our Porcelain Tiles Cleaning Creekmouth floor restoration service and our extensive professional cleaning options or Book a Quote.

There are often aspects of natural stone restoration when undertaking natural stone floor cleaning. Restoring stone and tile floors always involves several methods. Stone and tile floors suffer from traffic wear and damage, because individuals stroll over them. In most cases, dirt, spills and traffic scuff marks ruin floor's finish, subsequently the necessity for stone restoration. A polished granite or Stone floor wears faster as traffic abrasion that will quickly damage he finish and dull the luster. Foot traffic problems gradually affects porous natural stone including Limestone, Travertine, Terracotta & Sandstone, which are usually protected with a film-forming surface sealer.

Grout is normally probably the most vulnerable part of a tile installation. As it is a little concave, that means the grout traps more dirt compared to the stone itself. Holes may be filled and cracks repaired as part of a restoration.

We take off etching and scratches by resurfacing.Natural stone has the advantage that a grubby, permeable surface can be taken off, revealing a lovely new surface.