Find Stone and Tile Cleaning Company in Barnet

An initial shine on a Limestone floor will eventually loose its gloss. The dull appearance is caused by microscopic marks on the surface of the Limestone where it's been walked over. The only way to restore the initial finish is by polishing the floor. We use diamond polishing machinery to revive the gloss.

It is very nearly impossible to install a Limestone tile floor completely flat. A Limestone tile floor is leveled by grinding away the lippage and uneven tile edges. It is an involved process nevertheless the results are breathtaking. The floor will look like just one slab of stone.

After grinding, the tiles and the grout are at the exact same level. After grinding and polishing cleaning is a piece of cake, as the mop slides on the floor. There will be no grout lines to capture soil. Limestone floor restoration usually involves a few chip and crack repairs, using Limestone resin fillers. The particular restoration needed should be determined by the condition of of your Limestone floor.

Discover moreabout our Limestone cleaning Barnet service and our extensive stone floor cleaning restoration solutions or Book your free Quote

Slate is a wonderfully flexible flooring that may be sealed with a range of finishes including rough texture, smooth honed or polished finish. Whilst slate has a low porosity, it's going to nevertheless partly absorb and oil based spills, making aggravating spots.

We use a combination of machine and hand scrubbing to remove all traces of existing soiled sealers and clean the tiles. After our professional cleaning is complete, then use specialist sealers that last for many years not just months.

If you have got the right slate, it could be ground smooth, making it better to clean.

Find out about our Slate cleaning and sealing Barnet services and our comprehensive stone cleaning  options or Book a Quote

Minton geometric tiles are installed in Victorian and Edwardian Hallways.

Victorian tiles are manufactured from natural clay and have a normal matt finish.

A good deal of these floors have been sealed and then covered up with carpet or lino.

The main concerns with victorian floor tiles is removing the of oils, polishes, waxes, dirt and grime without harming the tiles.

Following cleaning, a colour intensifying sealer is applied to bring back the natural colours in the tiles. Topical sealers and waxes will give a floor a sheen or glossy finish.

Find outabout our Victorian Minton Tiles cleaning and sealing Barnet service in addition to our wide-ranging professional cleaningtreatments or Book a Quote

Porcelain is categorised as a ceramic, but made with alternative ingredients to conventional ceramic tiles.

High quality Porcelain has very low porosity, this means less stains, less water damage and mold, much less need for sealing.

There are some inferior porcelains that can absorb soil and spills just like natural stone floors. This soil may be tough to remove.

We possess the experience and equipment to eliminate this hard to reach soil.

Once your porcelain floor has been cleaned we are able to use a sealer to protect against everyday soil and spills.

Solid colour Porcelain Tiles could be ground and polished, just like Granite or Stone.

Discover more about our Porcelain Tiles Cleaning Barnet floor restoration service and also our wide-ranging professional cleaning options or Book a Quote.

There in many cases are aspects of natural stone restoration during natural stone tile cleaning. Each type of natural stone possesses its own characteristics and restoration difficulties. natural stone and tile floors suffer from traffic wear and damage, because people walk over them. Foot traffic harm, spillages and surface damage shows up on many stone and tile floors, ruining the finish, making a floor look lackluster and ugly, hence the necessity for stone restoration. A polished granite or Stone floor shows wear a lot faster due to traffic abrasion that will start to wear he finish and change the luster. A surface sealer does not prevent permeable stone and tiles like Sandstone, Limestone and Terracotta eventually struggling with wear and spill damage.

Grout is often probably the most sensitive section of a stone floor installation. Grout is usually a little recessed, hence the grout captures more grime compared to the stone and tile itself. Natural stone restoration more often than not includes some crack and hole repairs.

Resurfacing removes damage from etching and surface scratching.The beauty of natural stone is the fact that it may be re-surfaced, to show a new fresh finish.