Stone Tile Cleaning & Restoration Gossard's Green

In time, Limestone will end up worn and loose its finish. Scratching and spill damage build up and remove the original surface. Limestone Polishing is your only way to reinstate the shine. We use diamond polishing to hone and polish a Limestone floor and bring back the initial finish.

The majority of Limestone tile surfaces are uneven because the Limestone tiles are not put down flat. The only method to make a Limestone tile floor smooth is by grinding away the lippage and uneven tile edges. That is an involved process but the the finished results are beautiful. The floor will appear like an individual area of Limestone.

Following grinding, the tiles will be the same level the grout lines. It is incredibly easier to clean a smooth floor than a bumpy floor. There are no grout channels to capture dirt. Limestone restoration usually features a few crack and chip repairs, using Limestone resin fillers. After we have inspected the floor, we can advise the best Limestone restoration process.

Learn moreabout our Limestone cleaning Gossard's Green service along with our comprehensive stone floor cleaning restoration options or Book your free Quote

Slate is a remarkably adaptable material that may be protected using a range of finishes including rough surface, smooth honed or polished polish. Riven slate can get a build-up of dirt inside the crevices this is certainly difficult to remove.

We use rotary cleaning appliances and sealer removers clean the slate. Once the professional cleaning is completed , the floor is left to dry, then put on a durable, easy to maintain sealer.

If you like a smooth floor, we could grind the ground, subject to your slate being suitable for grinding.

Find out more about our Slate cleaning and sealing Gossard's Green services in addition to our comprehensive stone cleaning  services or Book a Quote

Minton geometric tiles are mainly found in Victorian and Edwardian Hallways.

The principal qualities of Victorian tiles include natural clay colours and a matt finish.

Owing to how old they are, these floors have had a lot of wear and can have layers of different sealers.

The key challenges with victorian floor tiles is removing several of oils, polishes, dirt, waxes and grime whilst not adversely affecting the floor tiles.

After cleaning an impregnating sealer is put on to boost the colours and protect the floor. The mat finish may be polished by making use of a wax or topical sealer.

Find out moreabout our Victorian Minton Tiles cleaning and sealing Gossard's Green work in addition to our wide-ranging professional cleaningservice or Book a Quote

Porcelain has started to become an progressively desirable option to standard ceramic tiles and natural stone.

Top quality Porcelain has really low porosity, which means less stains, less water damage, much less need to be sealed.

If Porcelain isn't manufactured properly, the surface can absorb soil similar to natural stone floors. It may be difficult to remove this soil.

We have the equipment and experience to eliminate this difficult to reach soil.

We can help minimize this soil with Porcelain sealers.

Solid colour Porcelain Tiles can certainly be ground and polished, just like Granite or Stone.

Find out more about our Porcelain Tiles Cleaning Gossard's Green floor restoration service in addition to our entire professional cleaning treatments or Book a Quote.

There are often aspects of natural stone restoration when undertaking natural stone tile cleaning. Natural stone floor restoration covers many different treatments. At the minimum, all stone and tile suffer some kind of basic damage. The most typical issue we run across during stone restoration is greasy soil trodden to the surface causing a unexciting, awful coating. Highly polished Stone tiles and granite floors show up wear very easily, as minute traffic scuff marks in the surface change the luster and hold soil. Permeable stone and tile that is sealed with a film-forming surface sealer will gradually suffer scratch damage.

Most stone and tile floors have grout. As it is a little bit deep-set, hence the grout traps more grime compared to the natural stone itself. Cracks, chips and hole repairs are often part of the restoration work.

We use grinding and honing to take away surface damage due to etch marks and scratches. Natural stone can be ground to show a new surface.