Stone Tile Cleaning & Restoration Willington

The initial shine on Limestone tiles will ultimately go dull. This surface damage is caused by traffic scratches and surface etching Ultimately, your Limestone will have to be re-polished. We use diamond polishing machines to bring back the shine.

It really is nearly unachievable to lay a Limestone floor perfectly flat. A Limestone tile floor can be smoothed by grinding off the lippage and uneven edges of the tiles. Grinding Limestone floors should only be undertaken by professionals. The floor will appear like just one piece of stone.

Following grinding, the Limestone and grout will be at exactly the same level. After grinding maintenance is very simple, because the mop slides over the floor. A smooth surface Limestone floor won't have grout lines to hold dirt. Chips, cracks and hole repairs tend to be part of the restoration work. We will recommend the correct restoration service.

Find outabout our Limestone cleaning Willington work and our extensive stone floor cleaning restoration services or Book your free Quote

Slate floors look fantastic with their textured surface and stunning colours. Cleft slate will get an accumulation of dirt and sealer residues in the crevices this is certainly difficult to remove.

We use industrial-grade sealer removers and rotary scrubbing appliances to remove the layers of old sealer. After professional cleaning we put on durable sealers.

Some slate floors can be ground to a smooth finish.

Get more information about our Slate cleaning and sealing Willington work along with our extensive stone cleaning  systems or Book a Quote

Many Victorian and Edwardian hallways could have floors made from Geometric Encaustic tiles.

The principal attributes of Victorian tiles are the natural clay colours and a matt finish.

Along with the variations in home decor, these floors come with carpet underlay, lino adhesive, bitumen and different sticky remains.

Cleaning these floors could be challenging owing to all of the old sealers and covering residues.

After cleaning an impregnating sealer is applied to enhance the colours and protect the floor tiles. If you prefer a sheen or gloss finish a surface sealer or wax could be used.

Find out moreabout our Victorian Minton Tiles cleaning and sealing Willington services including our entire professional cleaningsolutions or Book a Quote

Porcelain is a ceramic blend with additional sand and feldspar included to develop a denser tile.

Porcelain is very resistant to moisture, so spills should not pnetrate into the tile and cause stains.

If Porcelain is not made properly, the surface can be absorbent similar to natural stone floors. The microscopic surface pits insure that it is tough to remove this soil.

We can remove embedded dirt with equipment built to enter into the microscopic pits where the soil is held.

After cleaning, we apply specific Porcelain sealers to stop this problem.

Solid colour Porcelain Tiles may also be ground and polished, similar to Granite or Stone.

Get more information about our Porcelain Tiles Cleaning Willington floor restoration work along with our extensive professional cleaning work or Book a Quote.

Natural stone cleaning normally entails additional restoration services. Every type of natural stone has its own characteristics and restoration concerns. Stone and tile floors suffer from traffic wear and damage, because people walk on them. The most common issue we meet during stone restoration is greasy soil scuffed to the surface producing a lifeless, unattractive appearance. Polished Stone and granite floors show wear and tear very easily, as minute foot traffic scratches in the stone finish dull the shine and trap dirt. A surface sealer does not stop porous natural stone and tiles like Limestone, Sandstone & Terracotta eventually suffering from wear and spill damage.

Grout is generally probably the most sensitive section of a stone floor installation. As it is a little concave, which means that the grout draws in more dirt than the tile itself. Natural stone restoration usually requires some crack and hole repairs.

We take away acid etch marks and scratches by grinding and honing.The good thing about natural stone is the fact that it could be resurfaced, to show a new finish.