Stone Tile Cleaning & Restoration Chislehurst West

An initial polish on Limestone will gradually loose its gloss. This surface damage is due to foot traffic scratches and etch marks Limestone Polishing is the only way to bring back the original polish. We use diamond polishing to hone and polish a floor and rejuvenate the shine.

Most Limestone floors are not even since the Limestone tiles are not laid level. The only way to make a Limestone floor perfectly flat is by grinding off the lippage and jagged edges of the tiles. Grinding Limestone floors really should be carried out by experts. The Limestone looks "monolithic", appearing to be produced from just one piece of stone.

Following grinding, the Limestone and grout will be at the same level. Cleaning a ground, honed and polished Limestone floor is similar to cleaning a single slab of glass. A smooth surface Limestone floor does not have grout lines to hold grime. If your Limestone has cracks and chips, we can repair them with resin fillers, closely colour matched with the Limestone. After inspecting the floor, we will advise the best Limestone restoration program.

Read moreabout our Limestone cleaning Chislehurst West work and our wide-ranging stone floor cleaning restoration work or Book your free Quote

Slate is a wonderfully functional flooring that can be finished using a range of finishes from rough texture, smooth honed or polished surface. Our company is commonly called to clean slate when it has layers of old coating with embedded soil, so that the finish appears worn and dirty.

There are specialist equipment and products to eliminate the soil and old sealers, rejuvenating the initial slate finish. Once our professional cleaning is completed,finally, we apply a durable sealer which also makes the floor better to mop.

Some slate floors could be ground to a smooth finish.

Learn more about our Slate cleaning and sealing Chislehurst West work plus our extensive stone cleaning  solutions or Book a Quote

Victorian Clay or Minton geometric floor tiles are installed in Victorian and Edwardian Hallways.

The foremost characteristics of Victorian tiles are the natural clay colours and a matt finish.

Owing to their age, these floors have had lots of wear and can have layers of various sealers.

Cleaning these floors could be challenging due to the variety of old sealers and residues.

After cleaning an impregnating sealer is applied to boost the colours and protect the tiles. The mat finish could be polished by applying a wax or topical sealer.

Read moreabout our Victorian Minton Tiles cleaning and sealing Chislehurst West work including our substantial professional cleaningsolutions or Book a Quote

Porcelain is actually a ceramic mixture with sand and feldspar included to produce a denser tile.

High quality Porcelain has very low porosity, this means less stains, less water damage and mold, and less need for sealing.

If Porcelain isn't properly processed, the top can be absorbent similar to natural stone floors. The minute surface pits insure that it is hard to remove this soil.

You need professional equipment and cleaning solutions to remove this soil.

After cleaning, we use specific Porcelain sealers to avoid this problem.

Solid colour Porcelain Tiles can also be ground and polished, similar to Granite or Stone.

Discover more about our Porcelain Tiles Cleaning Chislehurst West floor restoration service in addition to our wide-ranging professional cleaning services or Book a Quote.

Natural tone floor cleaning is seldom just cleaning, there is regularly additional restoration needed. Each type of natural stone has its own characteristics and restoration concerns. All natural stone floors suffer from surface damage and general wear issues. The most frequent challenge we run across during stone restoration is fatty dirt scuffed to the surface creating a worn, unappealing finish. A polished granite or Stone floor wears more quickly due to traffic wear that will quickly scratch he finish and weaken the sparkle. A surface sealer does not avoid permeable stone and tiles like Limestone, Sandstone & Terracotta gradually suffering from wear and spill damage.

The vast majority of stone floors have cement grout lines. Grout is usually a little bit concave, which means that the grout captures more dirt compared to the natural stone itself. Cracks, chips and hole repairs are commonly a part of the restoration work.

Grinding and honing gets rid of surface damage from etching and surface marks.We're able to get rid of the existing surface from the stone, disclosing a brand new sparkling finish.