Find Stone and Tile Cleaning Company in Camden

In the long run, Limestone will become matt and loose its appearance. The surface damage is due to foot traffic scratching and etch marks Eventually, the floor will have to be re-polished. Diamonds are used to take away the dmaage and marks and rebuild the original surface.

If your floor has been laid leaving not level tiles, this might be described as “lippage”. The only method to make a Limestone tile floor smooth is by grinding away the lippage and irregular tile edges. This is an involved process nevertheless the results are stunning. The Limestone will have the appearance of becoming a single piece of stone.

After grinding, the Limestone and the grout will be at the same level. It is faster and easier to clean a smooth, sleek floor than an irregular floor. There will be no grout lines to capture dirt. If your Limestone floor has chips and cracks, we can repair them using resin fillers, colour matched to the Limestone. The type of restoration needed should be based on the condition of of the floor.

Learn moreabout our Limestone cleaning Camden service along with our comprehensive stone floor cleaning restoration solutions or Book your free Quote

Slate is a tremendously popular floor and wall tile due to its low porosity and the numerous textures and varieties of Slate available. Riven slate can get an accumulation of soil in the crevices that is difficult to get rid of.

There are professional sealer removal treatments and scrubbing appliances to eliminate the layers of old sealer. Once the professional cleaning is finished,finally we employ a long-lasting sealer that will make a floor better to look after.

If you've got a suitable slate, it could be ground smooth, rendering it better to clean.

Discover more about our Slate cleaning and sealing Camden service as well as our extensive stone cleaning  work or Book a Quote

Many Victorian and Edwardian hallways may have floors made from Geometric Encaustic tiles.

The primary characteristics of Victorian tiles are the natural clay colours and a matt finish.

Because of their age, these floors have had plenty of wear and can have layers of different sealers.

With their age, these types of floors can have many different covering residues, that need to have expert cleaning

Following cleaning, a colour intensifying sealer is put on to revive the oroginal colours in the floor. Topical sealers and waxes will give the floor a sheen or glossy finish.

Find out moreabout our Victorian Minton Tiles cleaning and sealing Camden work as well as our wide-ranging professional cleaningwork or Book a Quote

Porcelain is a ceramic blend with additional sand and feldspar added to produce a denser tile.

Quality Porcelain has really low porosity, which means less stains, less water damage, and less need for sealing.

Some inferior porcelain has surface pores that may absorb soil similar to natural stone floors. It may be hard to remove this soil.

We have the experience and equipment to remove this difficult to reach soil.

We can help minimize the dirt with Porcelain sealers.

Solid color Porcelain can be ground and restored just like Granite or Stone.

Get more information about our Porcelain Tiles Cleaning Camden floor restoration work plus our extensive professional cleaning treatments or Book a Quote.

Natural tone floor cleaning is almost never cleaning alone, there is commonly more restoration required. Natural stone restoration covers many different services. All stone and tile floors have problems with surface damage and general wear problems. Foot traffic deterioration, spots and surface problems shows up on most stone and tile floors, spoiling the finish, making the stone look lackluster and unattractive, subsequently the importance of stone restoration. Polished floors like terrazzo, Stone and granite reveal wear sooner once the polished finish goes dull from foot traffic scratches. A surface sealer will not avoid porous stone and tiles like Sandstone, Limestone & Terracotta eventually struggling with wear and spill damage.

Grout is usually the most vulnerable section of a tile installation. Grout is softer than stone and more at risk of abrasion and chemical deterioration. Cracks, chips and hole repairs are often an element of the restoration work.

Grinding and honing gets rid of damage from etching and surface scratches.Natural stone has got the advantage that a dirty, permeable surface can be removed, unveiling a beautiful new surface.