Find Stone and Tile Cleaning Company in Haringey

In the long run, Limestone will end up dull and loose its finish. This surface damage is due to foot traffic scratches and surface etching Sooner or later, your Limestone will need to be re-polished. We use industrial diamond polishing to hone and polish the Limestone floor and rejuvenate the initial appearance.

If your floor has been laid leaving not level tiles, this is certainly described as “lippage”. The only method to make a Limestone floor flat is by grinding off the lippage and uneven edges of the tiles. You need specialized machines and many years of hands on experience to grind and hone a Limestone tile floor, nevertheless the final result is beautiful. The Limestone floor will have a monolithic appearance as a single piece of stone.

After grinding, the grout sits is level with the Limestone. After grinding honing and polishing Limestone maintenance is a piece of cake, as the mop slides over the floor. Also, soil does not get stuck in the grout lines. Limestone floor restoration normally involves a few crack and chip repairs, using Limestone fillers. After assessing the Limestone floor, we will advise the best Limestone restoration program.

Find out moreabout our Limestone cleaning Haringey service in addition to our wide-ranging stone floor cleaning restoration service or Book your free Quote

Slate flooring is one of the most widely used kinds of natural stone, given that it requires less maintenance and cleaning. Whilst slate has a minimal porosity, it's going to always to some extent absorb and oil based spills, causing irritating spots.

We use a mixture of machine scrubbing and hand scrubbing to eliminate all traces of older soiled sealers and clean the tiles. Then we use hard-wearing sealers.

Some slate floors can be ground to a smooth finish.

Learn more about our Slate cleaning and sealing Haringey service including our substantial stone cleaning  treatments or Book a Quote

Victorian Clay or Minton geometric tiles are mainly found in Victorian and Edwardian Hallways.

The tiles have a matt finish and acquire their colour through the clay used in their manufacture.

With the changes in home decoration, these floors have underlay from carpet, lino, bitumen and additional adhesive remains.

The main concerns with victorian floor tiles is to remove years of oils, polishes, dirt, waxes and grime whilst not harming the floor tiles.

A colour intensifying sealer is put on immediately after cleaning, to revive the first colours in the tiles. The mat finish may be polished by making use of a wax or topical sealer.

Find out moreabout our Victorian Minton Tiles cleaning and sealing Haringey service and our substantial professional cleaningtreatments or Book a Quote

Porcelain has become an progressively sought after alternative to standard ceramic tiles and natural stone.

The added minerals makes Porcelain stronger than standard ceramic tiles.

If the blend of ceramic is not right, the top of tiles could be porous. just like natural stone floors. It may be hard to remove this soil.

We know how to get rid of embedded soil using equipment designed to go into the microscopic pits holding the soil.

Our Porcelain sealers can help stop further soil problems.

Solid colour Porcelain Tiles can certainly be ground and polished, the same as Granite or Stone.

Discover more about our Porcelain Tiles Cleaning Haringey floor restoration services including our extensive professional cleaning work or Book a Quote.

There tend to be aspects of natural stone restoration when natural stone cleaning. Natural stone floor restoration usually takes many techniques. Stone and tile floors suffer with foot traffic wear and damage, because people stroll over them. Traffic deterioration, spots and surface problems shows up on the majority of stone floors, ruining the appearance, making a stone floor look dull and ugly, consequently the importance of stone restoration. A polished Stone or granite floor shows wear more quickly because traffic wear that will start to damage he finish and dull the gloss. A surface sealer does not avoid permeable stone and tiles like Limestone, Sandstone and Terracotta eventually suffering from wear and spill problems.

Most stone and tile floors have cement grout. Grout is usually a little deep-set, that means the grout traps more soil compared to the tile itself. Cracks, chips and hole repairs are commonly an element of the restoration work.

We use grinding and honing to take away stone finish damage due to acid etching and scratches.You can take away the existing finish from the natural stone, disclosing a brand new clean surface.