Stone Tile Cleaning & Restoration Knight's Hill

The initial finish on Limestone will slowly dull. Scratching and etch marks strengthen and remove the original finish. Sooner or later, your floor will have to be repolished. We employ specialised equipment and industrial diamond tooling to hone and polish the stone.

If the tiles are not really, even this condition is named "lippage". We can grind off the uneven edges of the tiles, making a floor surface level. Grinding Limestone floors really should be performed by experts. The Limestone floor looks monolithic, appearing to be produced from a single slab of Limestone.

Following grinding, the Limestone tiles be flush with the grout. Mopping a ground and polished Limestone floor is a lot like cleaning a single slab of glass. There will be no grout channels to capture soil. Chips and cracks can be repaired with coloured resin repair fillers. After checking the Limestone floor, we will advise the very best Limestone restoration program.

Discover moreabout our Limestone cleaning Knight's Hill services and also our comprehensive stone floor cleaning restoration work or Book your free Quote

Slate is a very popular floor and wall tile because of its low porosity and the many textures and varieties of Slate available. Riven slate will get a build-up of dirt and sealer residues in the crevices that is hard to get rid of.

There are specialist machinery and products to remove the soil and old sealers, rejuvenating the original slate finish. Once the professional cleaning is finished,finally, we employ a lasting sealer which also makes your floor easier to clean.

If you want a smooth floor, we are able to grind the floor, subject to your slate being suited to grinding.

Get more information about our Slate cleaning and sealing Knight's Hill services plus our substantial stone cleaning  systems or Book a Quote

Many Victorian and Edwardian hallways could have floors produced from Geometric Encaustic tiles.

The tiles have a matt finish and obtain their colour through the clay used in their manufacture.

Along with the changes in residential design, these floors have carpet underlay, lino, bitumen and other glue deposits.

The key issues with victorian floor tiles is removing the of polished, oils, dirt, waxes and grime without doing damage to the tiles.

After cleaning an impregnating sealer is used to enhance the colours and protect the tiles. Topical sealers and waxes will provide the floor a sheen or glossy finish.

Read moreabout our Victorian Minton Tiles cleaning and sealing Knight's Hill work in addition to our substantial professional cleaningwork or Book a Quote

Porcelain is actually a ceramic mix with additional sand and feldspar included to make a denser tile.

Porcelain is extremely resistant to moisture, so spills can not seep into the tile and result in stains.

If Porcelain is not properly processed, the surface can absorb soil just like natural stone floors. This soil can be hard to remove.

We can remove embedded dirt with equipment made to go into the microscopic pits holding the soil.

After cleaning, we apply specialist Porcelain sealers to stop this problem.

If the porcelain is a through-colour, we could resurface the porcelain, just like granite or Stone restoration.

Get more information about our Porcelain Tiles Cleaning Knight's Hill floor restoration work including our comprehensive professional cleaning systems or Book a Quote.

There in many cases are aspects of natural stone restoration in natural stone tile cleaning. Restoring stone and tile usually involves a range of steps. natural stone and tile floors suffer from foot traffic wear and damage, because people wander over them. The most typical problem we run into during stone restoration is greasy soil scuffed into the surface generating a unexciting, unsightly finish. A polished granite or Stone floor shows wear faster because traffic abrasion that will begin to wear he polish and weaken the gloss. Foot traffic problems eventually has an effect on porous stones including Travertine, Limestone, Sandstone & Terracotta, which are most often protected with a film-forming surface sealer.

Virtually all natural stone flooring have grout lines. As it is slightly concave, hence the grout traps more grime compared to the tile itself. Many floors also frequently need to have crack, chip or hole repair.

Grinding and honing removes surface damage from etch marks and surface scratching.The good thing about natural stone is the fact that it may be re-surfaced, to show a new finish.