Stone Tile Cleaning & Restoration Tulse Hill

Limestone ultimately looses the original surface. The dullness is due to tiny scratching on the surface of the Limestone where it's been walked on. Eventually, your floor will need to be repolished. We use industrial diamond polishing to grind and polish the floor and rejuvenate the initial appearance.

It's almost unachievable to install a Limestone floor perfectly flat. We can grind away the irregular tile edges, making the tile surface perfectly flat. You require dedicated machines and several years of hands on experience to grind, hone and polish a Limestone tile floor, however the results are spectacular. The Limestone will get a monolithic appearance as a single piece of stone.

Following grinding, the Limestone will sit at the same level the grout. It is much easier to maintain a smooth, sleek floor than a bumpy floor. A smooth surface Limestone floor does not have grout lines to retain grime. If your Limestone floor has chips or cracks, we are able to repair the damage using resin fillers, closely colour matched with the Limestone. The particular restoration needed is going to be dependant on the current condition of the floor.

Read moreabout our Limestone cleaning Tulse Hill services and also our substantial stone floor cleaning restoration systems or Book your free Quote

Slate flooring is among the most well known forms of natural stone, since it needs less regular maintenance and cleaning. Whilst slate has a minimal porosity, it will probably nevertheless partially absorb and oil based spills, making annoying marks.

We use a combination of machine scrubbing and hand scrubbing to remove all traces of existing dirty sealers and clean the tiles. After professional cleaning we apply hard wearing sealers.

If you want a smooth finish, we could grind the slate, but we have to assess the slate before grinding.

Read more about our Slate cleaning and sealing Tulse Hill work plus our comprehensive stone cleaning  service or Book a Quote

Victorian Clay Tiles are installed in lots of Victorian and Edwardian hallways.

The tiles are unglazed from the natural colours of the clay used to make them.

With the changes in interior decor, these floors get underlay from carpet, lino adhesive, bitumen and other adhesive residues.

The primary concerns with victorian floor tiles is removing decades of polished, oils, waxes, dirt and grime while not doing damage to the floor tiles.

A colour intensifying sealer is put on following cleaning, to bring back the first colours when you look at the tiles. Topical sealers and waxes will give a floor a sheen or glossy finish.

Find outabout our Victorian Minton Tiles cleaning and sealing Tulse Hill service and our substantial professional cleaningservice or Book a Quote

Porcelain is a ceramic mix with sand and feldspar included to develop a denser tile.

Premium Porcelain has very low porosity, this means less stains, less water damage and mold, and less need to be sealed.

When the blend of ceramics is not right, the surface of the tiles could be porous. similar to natural stone floors. If you have got an inferior Porcelain, surface soil could be difficult to remove.

We have the equipment and experience to eliminate this difficult to reach soil.

Once your porcelain floor is clean we are able to apply a sealer which protects against everyday spillages.

In the event that porcelain is a through-colour, we could resurface the porcelain, exactly like granite or Stone restoration.

Get more information about our Porcelain Tiles Cleaning Tulse Hill floor restoration service as well as our comprehensive professional cleaning solutions or Book a Quote.

Natural tone tile cleaning is seldom just cleaning, there is certainly commonly extra restoration required. Restoring stone and tile floors in most cases involves a number of steps. All natural stone floors suffer with surface damage and general wear challenges. The most common issue we confront during stone restoration is oily soil scuffed to the floor producing a worn, unsightly coating. Polished floors like Stone, Granite and Terrazzo reveal surface damage more rapidly as the lustre dulls from traffic scratches. Traffic damage sooner or later affects porous stones which include Limestone, Terracotta, Travertine and Sandstone, which are usually protected with a film-forming surface sealer.

Almost all stone and tile flooring have cement grout lines. Being a little recessed, hence the grout draws in more dirt than the stone and tile itself. Cracks, chips and hole repairs are commonly part of the restoration work.

We take away acid etch marks and scratching by grinding and honing.The beauty of natural stone is the fact that it may be re-surfaced, to reveal a new fresh finish.